NICKEL & NICKEL ALLOYS

LH 501

Electrode for welding pure nickel

AWS / A 5.11

Ni, Ti, Al, Fe

TECHNICAL DATA

Tensile Strength:70,000 PSI

Elongation: 25%

TYPICAL APPLICATIONS

Used for welding of pure nickel and nickel plated steels. Overlay of nickel on steel. Joining copper and copper alloys with steel. Apparatus construction, chemical industry, valves and pipe lines.

LH 511

Electrode for welding monel (nickel-copper) alloys

AWS / A 5.11

E Ni Cu-7

TECHNICAL DATA

Tensile Strength: 80,000 PSI

Elongation: 30-35%

TYPICAL APPLICATIONS

Used for joining & cladding Monel, alloy steels, dissimilar steels. Suitable for welding following grades: Wnr. 2.4360, 2.4374, 2.4400, valves, pumps, impellers, etc.

LH 512

Cuppro-Nickel electrode for seawater corrosion resistance

AWS / A 5.6 E

Cu Ni

TECHNICAL DATA

Tensile Strength: 68,000 PSI

Elongation: 26%

TYPICAL APPLICATIONS

Used for joining & cladding similar grades of copper-nickel alloys, with up to 30% nickel content. Shipbuilding, food industry, desalinization plants, refrigerators, heat exchanger, pumps, valves, pipelines, etc.

LH 521

Ni-Cr-Fe basic coated stick electrode for heat resistance

AWS 5.11 E

Ni Cr Fe-3

TECHNICAL DATA

Tensile Strength: 85,000 PSI

Elongation: 35%

TYPICAL APPLICATIONS

This is a versatile electrode for welding of nickel, inconel, monel, nickel-chromium-iron alloys. HK alloys, steel, stainless steel and heat resisting steels. Also for welding dissimilar metals such as carbon steels, stainless steels, nickel, nickel alloys to each other. For use on equipment and components made of pure nickel, for fabrication of corrosion resistant tanks and containers, heat exchangers, furnace components, boilers, fittings, anchors, mill trunnions, symmetry gears, etc.

LH 521 A

Nickel based Molybdenum bearing electrode for tough, heat and corrosion resistant joints

AWS 5.11 E

Ni Cr Fe-2

TECHNICAL DATA

Tensile Strength: 85,000 PSI

Elongation: 35%

TYPICAL APPLICATIONS

Electrode for all-position welding of nickel, inconel, monel, nickel-iron-chromium alloys. HK alloys, stainless and heat resisting steels. For use on equipment and components made of pure nickel, for fabrication of corrosion-resistant tanks and containers, heat exchanger, furnace components, etc.

LH 521 AC

Molybdenum bearing electrode operating on AC machine for smooth-tough, heat and corrosion resistant joints

TECHNICAL DATA

Tensile Strength: 85,000 PSI

Elongation: 35%

TYPICAL APPLICATIONS

Electrode for all-position welding of nickel, inconel, monel, nickel-iron-chromium alloys. HK alloys, stainless and heat resisting steels. For use on equipment and components made of pure nickel, for fabrication of corrosion-resistant tanks and containers, heat exchanger, furnace components, etc.

LH 524

Ni-Cr-Mo stick electrode with basic flux coating for temperature and corrosion resistance

AWS 5.11E

Ni Cr Mo-3

TECHNICAL DATA

Tensile Strength: 1,20,000 PSI

Elongation: 35%

TYPICAL APPLICATIONS

To join and hard-surfacing of identical or similar grades of heat-resisting steels and alloys. Also for welding alloy steels like H 11, H 13, 17 Mn 4, St E355, 15 Mo 3, 15 Mn Ni 6 3, 13 Cr Mo 4 4, 10 Cr Mo 9 10 u.X 8 Ni 9. Specially suitable in sea water and offshore plants, chemical-engineering (nitric, sulphuric, hydrochloric, phosphorous acid as well as alkalis), flue gas dust collectors.

CONTACT US

ADOR FONTECH LIMITED

Belview, 7 Haudin Road, Bangalore-560042

Tel: 080 25596045/73

Fax: 080 25597085

E-mail: customerservice@adorfon.com

Submitting Form...

The server encountered an error.

Form received.

Ador Fontech Limited © 2017 Privacy Policy

Ador Fontech Limited

Belview, 7 Haudin Road, Bangalore-560042

Tel: 080 25596045/73 Fax: 080 25597085

CONTACT US

ADOR FONTECH LIMITED

Belview, 7 Haudin Road, Bangalore-560042

Tel: 080 25596045/73

Fax: 080 25597085