ALUMINIUM & ALUMINIUM ALLOYS

Aluminium Alloys | Aluminium filler rods | Ador Fontech Ltd Image Popup

ALUMINIUM & ALUMINIUM ALLOYS

TIG/MIG 400

Pure aluminum filler rod / wire for oxy-acetylene, TIG and MIG welding processes

TECHNICAL DATA

Source of heat: Oxy-acetylene/TIG torch
Flux: Flux 200 (paste)

TYPICAL APPLICATIONS

Used for welding pure aluminum, 1000 series, Al 99.8, Al 99.7, Al 99.5,E-Al. Tanks, brackets, bus bodies etc. Preheat thick plates (over 15 mm) to 150ºC.

tigmig 400
TIG/MIG 401

Al-Mg filler rod / wire for TIG / MIG welding-high strength and resistance to seawater corrosion

TECHNICAL DATA
TYPICAL APPLICATIONS

Used in ship building, off shore, cryogenic equipment, aluminum bridges, railway constructions, automobile industry, welding of AlMg 4, 5Mn, AlMg
5, AlMg 2MnO2, AlZnMg1, AlZnMgCuO,5, AlMgSiO, 5, AlMgSil, G-AlMg10,
G-AlMg5, G-AlMg3Si, G-AlMg5 Si.

tigmig 401
TIG/MIG 402

Al-Mg filler rod / wire for TIG / MIG welding processes

TECHNICAL DATA
TYPICAL APPLICATIONS

Used for welding aluminum magnesium alloy base metal. All elements of this alloy are closely controlled for optimum weld strength. Applications in
defense, general constructions, marine and structural industry. Welding of rolled and cast Al- Mg alloys such as AlMg4.5 Mn, AlMg5, AlZn4.5Mg1, AlMg5 Mn, AlMg2.7Mn, AlMgSi1 can be accomplished.

tigmig 402
TIG/MIG 404

Al-Mg alloy filler rod / wire for TIG / MIG welding processes

TECHNICAL DATA

Shielding gas: Welding grade argon

TYPICAL APPLICATIONS

Used for welding aluminum magnesium alloy base metal as per DIN 1725
Bl. 1 and Bl. 2, e.g. Al Mg 3, Al Mg 5, Al Mg Mn, Al Zn Mg 1, G-Al Mg 3/ +Si/ + Cu, G-Al Mg 5/ +Si, G-Al Mg 10, Al Mg Si1. Tank construction, aluminum structures, vehicle body building, shipbuilding, window manufacture etc.
Preheat plates exceeding 15 mm thickness to at least 150ºC.

tigmig 404
TIG/MIG 405

Al-Si alloy filler rod / wire for TIG / MIG welding processes

TECHNICAL DATA

Electrical conductivity: 21 Sm/mm2
Shielding gas: Welding grade argon

TYPICAL APPLICATIONS

Used for welding Al Si 5, Al Mg Si 0.5, Al Mg Si 0.8, Al Mg Si 1. Al & alloys with less than 2% alloying elements, cast aluminum alloys with up to 7% silicon content. Preheat plates exceeding 15 mm in thickness to approx. 150ºC.

tigmig 405
TIG/MIG 406

Al-Cu filler rod / wire for TIG / MIG welding processes

TECHNICAL DATA

Shielding gas: Welding grade argon

TYPICAL APPLICATIONS

TIG/MIG 406 used for naval applications, instruments, tanks, radars etc.

tigmig 406
TIG/MIG 407

Al-high Silicon filler rod / wire for TIG/MIG welding processes

TECHNICAL DATA

Shielding gas: Welding grade argon

TYPICAL APPLICATIONS

Used for welding cast aluminum alloys with more than 7% Si content. Tank construction, air conditioning equipment, domestic appliances, plates, tubes, profile sections. Preheat thick plates and large work pieces to approx. 150-180ºC.

tigmig 407
TIG/MIG 408

Al-Si alloy filler rod / wire for TIG / MIG welding processes

TECHNICAL DATA

Shielding gas: Welding grade argon

TYPICAL APPLICATIONS

Used for repairs and filling up cavities on Al-Si castings with more than 7% Si content. In special cases aluminum alloys with less than 2% alloying elements are also welded.

tigmig 408
TIG/MIG 804

Al-Mg alloy filler rod / wire for TIG / MIG welding processes

TECHNICAL DATA
TYPICAL APPLICATIONS

Used for welding aluminum magnesium alloy base metal as per DIN 1725
Bl. 1 and Bl. 2, e.g. Al Mg 3, Al Mg 5, Al Mg Mn, Al Zn Mg 1, G-Al Mg 3/ +Si/ + Cu, G-Al Mg 5/ +Si, G-Al Mg 10, Al Mg Si1. Tank construction, aluminum structures, vehicle body building, shipbuilding, window manufacture etc. Preheat plates exceeding 15 mm thickness to at least 150ºC.

tigmig 804
TIG/MIG 805

Al-Si alloy filler rod / wire for TIG / MIG welding processes

TECHNICAL DATA

Melting range 570-625ºC

TYPICAL APPLICATIONS

Used for welding Al Si 5, Al Mg Si 0.5, Al Mg Si 0.8, Al Mg Si 1. Al & alloys with less than 2% alloying elements, cast aluminum alloys with up to 7% silicon content. Preheat plates exceeding 15 mm in thickness to approx. 150ºC.

tigmig 805
TIG/MIG 807

Al-high Silicon filler rod / wire for TIG/MIG welding processes

TECHNICAL DATA

Melting range: 590-625ºC
Electrical conductivity: 21 Sm/mm2
Shielding gas: Welding grade argon

TYPICAL APPLICATIONS

Used for welding cast aluminum alloys with more than 7% Si content. Tank construction, air conditioning equipment, domestic appliances, plates, tubes, profile sections. Preheat thick plates and large work pieces to approx. 150-180ºC.

tigmig 807